The most popular biodegradable PS coated packaging

Biodegradable PS coated packaging paper

at present, the consumption of disposable plastic products is increasing. According to statistics, the annual output of plastic products in China has exceeded 20million tons, of which plastic waste that is difficult to recycle is calculated at 20%, and plastic waste is as high as 4million tons. In order to improve the urban ecological environment and promote sustainable development, the law of the people's Republic of China on the prevention and control of environmental pollution by waste stipulates that the whole industrial chain system of express green packaging should be established and improved, and the waste of packaging materials should be recyclable, disposable and can be absorbed by the environment

ps plate is an important consumable in the printing industry, with an annual output of 80million square meters in 2002. PS plate is mainly packaged with cow electric brush, pedal switch leather paper and black plastic film, plus cardboard packaging, which is not conducive to environmental protection, but also due to poor air permeability of packaging paper, the plate is prone to moisture regain when the temperature changes

biodegradable environmental protection PS coated packaging paper is a kind of biodegradable composite material, which is based on kraft paper and coated with a layer of 0.04mm black polymer film. Its main components include multi-component synthetic polymers, biochemical synthetic polymers (promoters) and modified natural polymer materials. Its series of products have the same or similar application performance and sanitary performance as ordinary plastic packaging paper in the process of use, and the black density is 4.7 ~ 5.3d; Tensile strength: longitudinal ≥ 4.5kn/m; Transverse ≥ 2.5kn/m, air permeability ≥ 3.2pa · s. After being used, the coated packaging paper can be quickly degraded into absorbable fragments or powders in the natural environment, degraded under the comprehensive action of the natural environment, and further degraded into carbon dioxide and water over time. It can be completely degraded in only 6 months in an environment with active microorganisms, meeting the national technical requirements for environmental labeling products. As a PS version packaging material, it can play the dual role of kraft paper and black plastic film, and has attracted the attention of the PS version industry nationwide

because environmental protection packaging paper can be biodegradable in the past two years, with low cost and high cost performance, as its production cost is closer to traditional plastic packaging materials, it will also be widely used in photographic film industry, paper industry and so on

reprinted from: printing technology

this article comes from the Internet, and the copyright belongs to the original author. It is only for everyone to share the study of solid web steel door GB 9156 (8). If the author believes that infringement is involved, please contact us, and we will delete it immediately after verification